Model type | SFP-4.25G-BIDI-40KM | Brand | HTF |
Encapsulation | SFP | Data Rate | 4.25G |
Wavelength | 1550nm-TX/1310nm-RX | Reach | 40KM |
Cable Type | SMF（9/125µm） | Interface | BIDI LC optical connector |
Tx power | -1~4dBm | Rx Sens | <-18dBm |
Protocols | SFF-8472 MSA compliant &SFF-8431;MSA Compliant | Features | Hot-pluggable SFP footprint； Low power dissipation； Metal enclosure, for lower EMI； RoHS compliant and lead-free； Support Digital Diagnostic Monitoring interface； Single +3.3V power supply |
Commercial Temperature Range | Commercial: 0~+70oC Extended: -10~+80oC Industrial: -40~+85oC | ||
Optical Components | 1550nm DFB laser transmitter and PIN photo-detector |
Recommended Operating Conditions and Power Supply Requirements
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | TOP | 0 | 70 | oC | commercial | |
| -10 | 80 | extended | ||||
| -40 | 85 | industrial | ||||
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
Data Rate | 4.25 | Gb/s | ||||
Control Input Voltage High | 2 | Vcc | V | |||
Control Input Voltage Low | 0 | 0.8 | V | |||
Link Distance (SMF) | D | 40 | km | 9/125um |
FAQ
1、Question: Does it works with any fiber cable such as om1, om2, om3, om4 multimode fiber cables?
Answer: Yes, OM1, OM2, OM3, OM4 LC to LC duplex multimode fiber cables can all work with this module.
2、Question: If i wanted to connect a brocade to a netgear using a sfp+ module, if i mixed the brocade and netgear transceivers, they should work right?
Answer: As long as both devices recognize the SFP+ modules installed, i.e. sending/receiving light, then connectivity will work between the two using Ethernet standards.
3、Question：What are CWDM, DWDM, SFP and GBIC used for? What kind of company buys them?
Answer：These are optical fiber transceivers designed to be used with passive optical multiplexers. If you have a number of these all transmitting on different wavelengths, you can use a passive multiplexer to combine each signal onto a single fiber pair, and then de-multiplex the signal at the far end. Unlike active systems, a passive multiplexer requires no power or management - it's literally a set of waveguides and prisms in a rack mount chassis - which greatly reduces the cost of doing WDM and eliminates a potential point of failure in the system.
Hot Tags: 4.25g tx1550rx1310 40km sfp, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, SFP BIDI 120km Transceiver in stock, Optical Module SFP BIDI 20km, 155Mbs 5549SFP 120km Module, 3G 1310nm 2km Transceiver in stock, 155M LC 1550TX 1310RX SFP ER, 80km SFP BIDI Transceiver in stock