622Mb/s SFP 850nm Multi-Mode Optical Transceiver

622Mb/s SFP 850nm Multi-Mode Optical Transceiver

SFP 622M 850nm 550m Multi-Mode Optical Transceiver Up to 550m on 50/125um MMF 850nm VCSEL laser transmitter and PIN photo-detector Application Switch to Switch Interface Fast Ethernet Switched Backplane Applications Router/Server Interface

622Mb/s SFP 850nm Multi-Mode Optical Transceiver

Product Details

Model   type

SFP-622M

Brand

HTF

Encapsulation

SFP

Data Rate

622Mb/s

Wavelength

850nm

Reach

550M

Interface

Duplex LC

LD

DFB

Cable Type

SMF

DDM Support

Yes

Tx power

>-3dBm

Rx Sens

<-20dBm

Transmission Distance

550m SMF

Quality guarantee

3 years


Case operating temperature

Commercial: 0 ~ +70oC

Extended: -10 ~ +80oC

Industrial: -40 ~ +85oC


The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the VCSEL laser and the PIN photo-detector .The module data link up to 550m in 50/125um multi-mode fiber.


Digital Diagnostic Functions

The following digital diagnostic characteristics are defined over the Recommended Operating Environment unless otherwise specified. It is compliant to SFF8472 Rev10.2 with internal calibration mode. 



Parameter

Symbol

Min.

Max

Unit

Notes

Temperature monitor absolute   error

DMI_   Temp

-3

3

degC

Over   operating temp

Supply voltage monitor absolute   error

DMI   _VCC

-0.15

0.15

V

Full   operating range

RX power monitor absolute error

DMI_RX

-3

3

dB


Bias current monitor

DMI_   bias

-10%

10%

mA


TX power monitor absolute error

DMI_TX

-3

3

dB







FAQ:

Q:Is it necessary to clean a transceiver's optical connector? 

A:Dust and contamination can accumulate on transceiver's connectors and cause problems such as reducing the optic launch power. To ensure better connection, HTF strongly recommends cleaning both connectors each time you disconnect and reconnect them. 

Q:What's the operating temperature of the 1000BASE SX transceivers? 

A:The 1000BASE-SX SFP transceivers operate at a commercial temperature range (0 to 70°C). Also, industrial temperature range are available for custom. 

Q:What cable type is needed for 1000BASE SX transceivers? 

A:The 1000BASE-SX SFP transceivers use duplex multimode fiber patch cables with LC/UPC connectors, both OM1 and OM2 are feasible. 

Q:What's the 1000BASE SX transceivers max supported distances? 

A:The 1000BASE-SX SFP transceivers support up to 550m on OM2 multimode fibers.


Hot Tags: 622Mb/s SFP 850nm Multi-Mode Optical Transceiver, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 1 25G 550m SFP, SFP 3KM BIDI 1 25G Optical Transceiver, 1 25G DWDM SFP 80km 50GHz, 10Gb SFP 1310nm 10km Optical Transceiver, 155Mbs SFP CWDM 40km in stock, 1 25G SFP 1550nm 100km

 

Previous: sfp+ module multi mode fiber 10gbe lc 622M 1550nm 40km Module
Next: SFP 622M 1310nm Multi-mode Optical Transceiver

 

Open Mobile Site

You Might Also Like